Hello!
I have a problem with the combination RAID 1 and Workstation (9). When resuming on the RAID 1 array, it takes twice as long (two minutes) as from a disk without RAID. Anyone having a clue why that is?
System and disks works as normal for all other software. Average I/O performance is 85MByte/sec (SATA 2.0)
Host:
- Windows 7 64 bit prof
- 24 GB RAM
- OS on SSD
- Data on 1 TB RAID 1 (mirror) (Segate), RAID is Intel OnBoard
- I/O SATA 2.0
Guest:
- Windows 7 64 bit prof
- 4 GB RAM
Parkdale HDD speed test on RAID 1 and single HDD drive is almost the same, around 85MByte/sec Read/write.
Anyone understanding why resume using VMWare Worksation (9) takes the double amount of time on the RAID 1 array compared to a non RAID disk?
Thanks.