Morning,
I have come across an issue that I am unable resolve nor can I find a solution on the the internet so I thought I would ask here.
I am running Workstation 11 with a GNS3 1.2.3 setup, I have attempted to create a "trunk" from a FastEthernet port using encapsulation 802.1q to my Host Only vmnet adapter on my host machine that is connected to a vswitch that has two port groups configured to tag traffic on vlan 10 and 20.
All very simple but for me, not so much... I can see packets leaving the cisco with the 802.1q tag for either 10 or 20 but I cannot see the vmnet adapter talking 802.1q back.. I have configured IP's on the devices hosted on esxi in the same network as vlan10 and it still is not being tagged.. I see the traffic from one of the vm's in the vlan assigned port group attempting to talk outbound and there are no tags in the packets for 802.1q I can only assume that the vswitch is stripping the tags.
Any help would be appreciated.
--Added a packet capture with comms to and from the router and A VM.
VM 10.10.10.50
Router IP 10.10.10.254
Message was edited by: AshleyCotter